Description
The Fluke Norma 6000 Series Portable Wideband Precision Power Analyzers give you more freedom than ever before to make high accuracy power measurements wherever you need to—whether in the lab, or in the field. Designed for portability the lightweight, battery powered Fluke 6000 Series eliminates the need to carry large, fragile, expensive analyzers into the field, allowing you to make measurements directly at the load in nearly any environment. By measuring directly at the load, you can discover how the equipment operates under real-world conditions, with real-world variables, not just at a test bench or in the lab.
The Fluke 6003+ and 6004+ models both add the capability to measure mechanical parameters such as speed and torque (from separate transducers) to discover the electrical to mechanical efficiency of the load under a variety of typical operating modes.
Features
- Key measurements: Voltage, current, active power, reactive power, apparent power, power factor, and harmonics with associated values
- High accuracy and wide bandwidth – 0.1% measurement accuracy and 500 kHz bandwidth
- Highly portable and easily installed in tight spaces – only 3.78″ (9.6 cm) thick
- Operate continuously for up to 10 hours without an external power supply using the 5000 mAh Li-ion internal battery
- Measure safely – safety rated for CAT III 1000V, CAT IV 600 V environments
- Measure three phase power and DC output power at the same time with four channels, with voltage and current inputs on each channel
- Make mechanical torque and speed measurements using the included inputs and outputs
- 0.1% accuracy, 500 kHz bandwidth, 200 ks/s sample rate so you can rely on the power conversion system measurements you take no matter what distortion may be present
- USB and RS485 interface and open communication protocol for easy system integration and software platform flexibility
- Combine two analyzers to enable simultaneous measurement of multiple circuits for even more troubleshooting capability – configurable to 6 or 8 channels using dual analyzer synchronization
- View critical data in the field on the main display – Meter, Waveform, Harmonics up to the 100th, Vector and Trend
- Ensure high common-mode rejection and allow flexible configurations according to measurement requirements using the electrically isolated channels
- User adjustable measurement rate from 100 ms to 1 s with continuous logging via 32GB of onboard storage
- Easy in-field set up using the integrated front panel or a remote PC connection (USB or RS485)
- Online measuring, data download and analysis with included PC software (Fluke Power Analyzer Software)
- Full remote control of the connected instrument using Fluke Power Analyzer Software and a local USB or long-distance RS485 connection
