Description
After carrying out a proving test the HVI can be applied to the HV source and the neon indicators will show whether there is voltage present. The indication will start as low as
200V by means of flashing neon lights which will gradually increase their rate of flash until steady state is reached at 6.35KV (the phase to earth voltage on an 11kV system.
- Indicates live voltage up to 15kV AC.
- Indicator Range: 0.2 to 15kV 50/60HZ and DC.
- Circuit Current: 0.4mA nominal at 15kV, 0.293mA nominal at 11kV.
- Circuit redundancy for added safety.
- Suitable for discharging lines.
- Small and compact for use in confined spaces.
- Flashing neon display for clear indication.
- High immunity to interference fields.
- Utilises proven resistor chain method of measurement.
- Clear safety limit marks.
- Operator hand guard with viewing window.
- Automatic battery check on Proving Unit.
- Indoor and outdoor use (dry conditions).
- Operating temperature range – 5°C to + 50°C.
- Can be used on DC systems.
- Supplied with proving unit.
- PU Output Voltage: 300V DC nominal.
- Batteries: 2 off C cells, IEC R14 or LR14.
- Indicator Dimensions: 485 x 32mm.
- Indicator Weight: Weight: 0.6kg.
- Proving Unit Weight: 0.4kg.
